الملخص
The steady state creep in Al- SiCP composite cylinder subjected to internal pressure was investigated. The creep behavior of the material were described by threshold stress based creep law by assuming a stress exponent of 5. The effect of size and content of the reinforcement (SiCP ), and operating temperature on the stresses and strain rates in the composite cylinder were investigated. The stresses in the cylinder did not have significant variation with varying size and content of the reinforcement, and operating temperature. However, the tangential as well as radial strain rates in the cylinder could be reduced to a significant extent by decreasing size of SiCP, increasing the content of SiCP and decreasing operating temperature.
الكلمات المفتاحية
بيانات النشر
- المعرّف الرقمي
- 10.24200/tjer.vol6iss2pp20-32
- المجلة
- المجلة العُمانية للبحوث الهندسية, 6(2), 20
- الناشر
- جامعة السلطان قابوس
- وصول مفتوح
- وصول مفتوح ذهبي
- الترخيص
- CC BY 4.0
اقتبس هذه المقالة
APA 7
Singh, T., & Gupta, V. K. (2009). Effect of Material Parameters on Steady State Creep in a Thick Composite Cylinder Subjected to Internal Pressure. The Journal of Engineering Research, 6(2), 20. https://doi.org/10.24200/tjer.vol6iss2pp20-32
MLA 9
Singh, Tejeet, and Vinay K. Gupta. "Effect of Material Parameters on Steady State Creep in a Thick Composite Cylinder Subjected to Internal Pressure." The Journal of Engineering Research, vol. 6, no. 2, 2009, pp. 20. https://doi.org/10.24200/tjer.vol6iss2pp20-32.
شيكاغو (المؤلف–التاريخ)
Singh, Tejeet, and Vinay K. Gupta. 2009. "Effect of Material Parameters on Steady State Creep in a Thick Composite Cylinder Subjected to Internal Pressure." The Journal of Engineering Research 6 (2): 20. https://doi.org/10.24200/tjer.vol6iss2pp20-32.
هارفارد
Singh, T. and Gupta, V. K. (2009) 'Effect of Material Parameters on Steady State Creep in a Thick Composite Cylinder Subjected to Internal Pressure', The Journal of Engineering Research, 6(2), pp. 20. doi:10.24200/tjer.vol6iss2pp20-32.
فانكوفر
Singh T, Gupta VK. Effect of Material Parameters on Steady State Creep in a Thick Composite Cylinder Subjected to Internal Pressure. The Journal of Engineering Research. 2009;6(2):20. doi:10.24200/tjer.vol6iss2pp20-32
IEEE
T. Singh, and V. K. Gupta, "Effect of Material Parameters on Steady State Creep in a Thick Composite Cylinder Subjected to Internal Pressure," The Journal of Engineering Research, vol. 6, no. 2, pp. 20, 2009, doi: 10.24200/tjer.vol6iss2pp20-32.