[
    {
        "id": "osp-13408",
        "type": "article-journal",
        "title": "Analysis and Characterization of TIO2 Nanoparticle Effect on Aluminum Matrix Nanocomposites by Stir Casting",
        "author": [
            {
                "family": "Al-Samarai",
                "given": "Riyadh A."
            },
            {
                "family": "Obaid",
                "given": "Abdul Salam Y."
            }
        ],
        "URL": "https://omanscience.com/ar/articles/analysis-and-characterization-of-tio2-nanoparticle-effect-on-aluminum-matrix-nanocomposites-by-stir-casting",
        "language": "en",
        "issued": {
            "date-parts": [
                [
                    2025
                ]
            ]
        },
        "container-title": "The Journal of Engineering Research",
        "volume": "21",
        "issue": "2",
        "page": "154-162",
        "DOI": "10.53540/tjer.vol21iss2pp154-162",
        "publisher": "Sultan Qaboos University",
        "ISSN": "1726-6009",
        "abstract": "The objective of this study was to use stir casting to create aluminum matrix nanocomposites with a uniform dispersion of TiO2 nanoparticles to evaluate their effect on the performance of aluminum-based products. Microstructural analysis significantly reduced the grain size, with an average drop of 18.2%. This suggests that the TiO2 nanoparticles affect the mineral matrix, which improves the mechanical properties. With the incorporation of TiO2 particles, the results showed improvements in stiffness (6.97%), nominal stress (27.92%), actual failure stress (25.6%), and ultimate stress (26.1%). Outperforming commercially pure aluminum, the mechanical properties of the resulting nanocomposites were significantly improved by adding TiO2 nanoparticles into the aluminum matrix. Microstructural and X-ray diffraction (XRD) studies confirmed the beneficial effects of the addition of nanoparticles."
    }
]